Shyne Posted July 29, 2010 Report Share Posted July 29, 2010 Hi, we've had Frontier 370 for about 5~6years now. However the quality of the picture is not so great. i did not know but someone brought a picture from another lab and they are so clear and shiny. Our color looks dull and somewhat blur compare to them. We are using Fuji chemicals - Cartridge chemicals. Is this problem with the machine or the computer settings? please help me... thank you! Quote Link to comment Share on other sites More sharing options...
tolik197 Posted July 29, 2010 Report Share Posted July 29, 2010 Try to filter solutions Р1 and Р2, carefully to wash the car and to make the test pump. Then add approximately on 0,5 l of a fresh solution in Р1 and Р2 Quote Link to comment Share on other sites More sharing options...
Michaelka Posted July 29, 2010 Report Share Posted July 29, 2010 Are you printing film or digital? Bad colors can be produced by wrong settings in scanner - there are several possibilitys of color settings in scanner, but no in printer. Check paper and chemicals as described befor. kind regards mk Quote Link to comment Share on other sites More sharing options...
Kevbo37 Posted August 11, 2010 Report Share Posted August 11, 2010 Print a test grid to verify that your lasers are aligned. If the lines are not crisp and black then something is out of alignment. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.