pepe21 Posted June 29, 2010 Report Share Posted June 29, 2010 I am getting lines on my images and I am using a Fuji frontier 370 I will post an image, if someone knows about this problem and can help me out I would truly appreciate it..thanks in advance. Quote Link to comment Share on other sites More sharing options...
pepe21 Posted June 29, 2010 Author Report Share Posted June 29, 2010 this is the image, sorry...I had to re-size. Quote Link to comment Share on other sites More sharing options...
pepe21 Posted June 29, 2010 Author Report Share Posted June 29, 2010 hahahahaha..it was still big and for some reason did not notice the file size. Quote Link to comment Share on other sites More sharing options...
tolik197 Posted June 30, 2010 Report Share Posted June 30, 2010 in what direction of the band, along moving the paper or across. if perpendicular motion wipe the steel belt in sections sub-scanning, or possible dies the crossbar engine in sub-scanning. Quote Link to comment Share on other sites More sharing options...
Kevbo37 Posted June 30, 2010 Report Share Posted June 30, 2010 tolik197 is correct if the lines are perpendicular to the direction of travel then it is a problem with the subscanning section not a laser problem. Did this problem happen suddenly or progressively? Quote Link to comment Share on other sites More sharing options...
pepe21 Posted June 30, 2010 Author Report Share Posted June 30, 2010 it happen suddenly...and yes the lines are perpendicular. Quote Link to comment Share on other sites More sharing options...
Kevbo37 Posted June 30, 2010 Report Share Posted June 30, 2010 Definintely check out the subscanning section. It could be a loose belt or a worn out bearing or even debris somewhere in the mechanisn causing it to not move smoothly. Quote Link to comment Share on other sites More sharing options...
pepe21 Posted June 30, 2010 Author Report Share Posted June 30, 2010 thanks, I really appreciate all of your help. Quote Link to comment Share on other sites More sharing options...
tolik197 Posted July 1, 2010 Report Share Posted July 1, 2010 in than turned out to be problem? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.