Jump to content

Frontier laser


alexpm57
 Share

Recommended Posts

Hola I have a frontier 550, for a few days the white parts of the photos go out for me yellowish, it(he) is not chemical because already it(he,she) changes all, I measured the temperatures and they were nice, hize a strip of test(proof) and me went out well, they say to me that it can be the laser. Please it prompt helps, graces(thanks).

Link to comment
Share on other sites

tratan de introducir el papel sin imprimir o utilizar colourstrip caja con un buen papel en su interior. Si el yellowishn ocurrido todavía es posible que su química no está bien, si usted cree que su química está bien, quizás tratar de otra marca / lote de papel, tal vez su papel actual es cada vez expirado. [/ Quote]

Thank you very much for the response, already introducí paper(role) sín to stamp and went out well, I have other minilabs that work with the same lots of paper(role) and do not have problem, have discarded chemist's problem, please I look for more alternatives, graces(thanks).

Link to comment
Share on other sites

what's your fuji tech said ? Laser is one of posibility, but i hope it's not the laser... is there any laser calibrating menu in Frontier ? (sorry i don't have frontier minilab, i use Noritsu)...In noritsu minilab, if you're not satisfied with your print you can always calibrate the laser with laser calibrating menu.......I ever see how frontier works (my sister have Frontier340), everytime you change magazine, frontier always feed a small amount of paper, is it (feed paper) also yellowish ? if the feed papers are yellowish (it;s sound crazy) but maybe there is a leak on exposure deck so little unwanted light enter the exposure deck.

Link to comment
Share on other sites

I am sorry everyone here is giving you suggestions you have already tried. Since you have already changed your chemistry and your test strips (control strips) are coming out OK then it is either your aom driver or more likely a laser problem. It is probably a dirty aom or other optic associated with the blue laser. check the classified for National Laser Company. They have fixed hundreds of Fuji lasers.

Link to comment
Share on other sites

First check your AOM drive if possible. You can check by alternating the input and output lines of B and G Lines. If the problems goes to redish, you should replace the AOM drive. In Bangladesh, AOM is repairable. Otherwise, It is laser problem. I think Laser also repairable for this types of problem.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
 Share

×
×
  • Create New...