tech2 Posted April 15, 2010 Report Share Posted April 15, 2010 Hi all, Thanks to ghn5ue first of all for your reply to an earlier issue. I have a problem machine F350 where 4 inch paper gets jammed before or up to the distribution section. I have greased the distribution bars and cleaned the sucker cups in that area but still this occurs. If I put an 8 inch through first when the machine is first started then the 4 inch rarely jams. Could this be a paper curling issue? Is there an adjustment that can be made in setup and maintenance to allow 4 inch to be transported more freely? Any info from anyone who has had similar problems would be appreciated. Regards Tech2 Quote Link to comment Share on other sites More sharing options...
LFPinCA Posted June 10, 2010 Report Share Posted June 10, 2010 I've had a similar issue and had to turn off the distributor in order to print 4x6s and smaller. It will slow down your output rate, but it will still allow the prints to go into the processing tanks. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.