Jump to content

Line on prints


theberah
 Share

Recommended Posts

With the laser unit removed, try feeding your print up through the side door into the optical section, being careful to get it placed like it would be when exposing.

  Then use a flashlight to carefully check the area directly above the line on the print.  

I had a problem like this once, and after several tries at cleaning I did this and when shining the flashlight saw a slight reflection of light. On careful examination I found

a small thread of fibre.. maybe from a sweater that had wrapped itself around a screw head and was just barely poking into the light path.  Without the reflection of the flashlight I could never see it! It was finer than a human

hair, but caused a definite line in the prints.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
 Share

×
×
  • Create New...