theberah Posted May 24, 2010 Report Share Posted May 24, 2010 How do I achieve sharp focus on Frontier 370? I have done the focusing according to the manual but the prints are not very sharp. Quote Link to comment Share on other sites More sharing options...
eddye Posted May 24, 2010 Report Share Posted May 24, 2010 iF THE FOCUS SET UP DOES NOT WORK THERE ARE 2 THINGS THAT MIGHT CURE THE PROBLEM FIRST IF THIS IS AN OLD MACHINE REMOVING THE LARGE INTERNAL SPRING WITHIN THE LENS COULD HELP SECOND YOU PROBABLY NEED THE SPECIAL FOCUS JIG TO RESET THE ORIGNAL FOCUS DATA. Quote Link to comment Share on other sites More sharing options...
granher390 Posted May 24, 2010 Report Share Posted May 24, 2010 Already you tried with the menu (44Q). Moving the FOCUS OFFSET Quote Link to comment Share on other sites More sharing options...
Kazz3 Posted May 24, 2010 Report Share Posted May 24, 2010 Try this it works wonders. Remove the CCD. (Please be careful, refur to the manual) Clean the little mirror on top of the CCD. The result might surprise you. Quote Link to comment Share on other sites More sharing options...
theberah Posted May 25, 2010 Author Report Share Posted May 25, 2010 Thanks everybody for your contribution. I will let you know the results Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.