Alfa Posted May 6, 2010 Report Share Posted May 6, 2010 Fuji Frontier 500 Dear forum. Does anyone want to help or know of these problems and how I might. can remedy the problems. The resulting first E-LP 2861, CTL 27 / 2 2414 Rigist Tilt. Where is the fuses they are talking about in the instruction book and it may be true that some diode operating on the PCB but not all. Do you believe in can sense that the problem is large. Thank you in advance for your help. Yours sincerely, Henrik. Quote Link to comment Share on other sites More sharing options...
Boarder Posted May 8, 2010 Report Share Posted May 8, 2010 probably you close the circuit, when the printer powered!! its a bad problem(((( you can find two fuses on CTL-27 in the back of your printer (see manual). you must replace berning fuse (1 Ampere). tbe careful!!! sory for my english Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.