abd Posted September 5, 2009 Report Share Posted September 5, 2009 the machine is frontier 340 and the problem is in every few minute the dryer is stop and we push the paper exit roller by hand and it is normal but every few minute we should push the roller and i try to change the dryer belt and differnt rollers but the problem is still apearing anybody have get this problem please help me thank u Quote Link to comment Share on other sites More sharing options...
yy482 Posted September 17, 2009 Report Share Posted September 17, 2009 check the gear on the end of the dryer Quote Link to comment Share on other sites More sharing options...
dfcnamibia Posted September 17, 2009 Report Share Posted September 17, 2009 had similar problem in our other branch - on the sides of the rolers the housing/holder was worn out .... check that first ..... Quote Link to comment Share on other sites More sharing options...
tech2 Posted April 28, 2010 Report Share Posted April 28, 2010 abd, Did you find a solution to your problem? I have something similar. The dryer exit rollers stop rotating, you can pull the print out by hand (it's tight) and then the dryer is ok for a while. I think this is causing jamming in rack 6. The prints can't get up into the dryer section. dfcnamibia, can you explain what you did in more detail please? yy482 can you also elaborate on which gear you are talking about? Thanks all Tech2 Quote Link to comment Share on other sites More sharing options...
Christina Rose Posted April 28, 2010 Report Share Posted April 28, 2010 check the long plastic guide which is placed downside at the chain. it makes chain moves nicely and keep tension.. if its worn out at the end rack number 6 would jump. because the low chain tension. C...R Quote Link to comment Share on other sites More sharing options...
abd Posted May 2, 2010 Author Report Share Posted May 2, 2010 ya Christina is right in my case the problem is the gear on the end of the drayer exit section check it Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.