printprincess Posted April 15, 2010 Report Share Posted April 15, 2010 Hi All, new to the forum and already looking for advice! I have a frontier 340 with scanning issues, all my prints have a slight red and blue 'halo' type shadow on the edges and are not as sharp as they should be . An engineer told me once how to recalilibrate the scanner using the menu's on the system, problem is a cant remember how!!!!! Just want to try resetting it to see if it resolves the problem before shelling out for expensive parts Any help greatly appreciated Vic Quote Link to comment Share on other sites More sharing options...
minilabmex Posted April 18, 2010 Report Share Posted April 18, 2010 HAVE THE SAME PROBLEM WITH FILM AND DIGITAL FILES? Quote Link to comment Share on other sites More sharing options...
minilabmex Posted April 18, 2010 Report Share Posted April 18, 2010 CHECK THI´. 5.6.17 Laser Beam Sync. Fine Adjustment Print (0548) ON THE SERVICE MENU Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.