cyberlab Posted March 1, 2010 Report Share Posted March 1, 2010 What are causes and solutions of this messages number : W-2403 and W-2401 Please, Help Quote Link to comment Share on other sites More sharing options...
cyberlab Posted March 2, 2010 Author Report Share Posted March 2, 2010 is there any one can help, please Quote Link to comment Share on other sites More sharing options...
pietre48 Posted March 15, 2010 Report Share Posted March 15, 2010 RFM (read fucking manuel) trouble shooting first edition (PP3-C916E) good hunting.P. Quote Link to comment Share on other sites More sharing options...
shutter Posted March 24, 2010 Report Share Posted March 24, 2010 As it says in the manual, the paper jams on its way up to the backprint area. First, since the paper is transported with help of rollers mounted on the two lower doors it is very important that they are locked on both sides by the magnetic holders. They can unlock on one side without any alarm. Second, the whole shortside cover (350D8890130) with both the lower doors are hold with 6 screws. those 6 screws should have 6 metal tube spacers that fixes the distance between the rollers mounted in the doors and the rubber feeding rollers. Third, all the other mechanical reasons..... regards Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.