A Munro Posted October 20, 2009 Report Share Posted October 20, 2009 Can anyone help with our 570. We have an error that pops up saying "red current limit error". Fuji want loads of cash for a part ex unit. Does anyone know who can repair them?. Quote Link to comment Share on other sites More sharing options...
sisir Posted October 21, 2009 Report Share Posted October 21, 2009 I think the proper way is to replace the Laser Unit. U can try to repair the unit. I think it would cost about US$5000 appx. Quote Link to comment Share on other sites More sharing options...
MALACAL Posted October 21, 2009 Report Share Posted October 21, 2009 that message tells you that red light is out of range, there is a procedure, but is at your own. Remove the top cover of the laser, find a card for each of the red light has a potentiometer on the back, you'll adjust until no message. then you will have to make adjustment of the laser linearity Quote Link to comment Share on other sites More sharing options...
ABDUL QUDDUS Posted October 21, 2009 Report Share Posted October 21, 2009 Hi, you can increase the red current limit from software and your laser will work without any problem. regards ABDUL QUDDUS Quote Link to comment Share on other sites More sharing options...
A Munro Posted October 21, 2009 Author Report Share Posted October 21, 2009 Thanks I will give it a go. Quote Link to comment Share on other sites More sharing options...
Kevbo37 Posted October 21, 2009 Report Share Posted October 21, 2009 You can increase the red current limit through the software to get you by for a while but it means that your red laser is soon to die. How many hours are one the red laser? Contact me, Kevin Waller---kwaller@nationallaser.com to discuss options for permanent repair. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.