Jump to content

Frontier 500 ERROR 2523/2526


Cryptex85
 Share

Recommended Posts

E-LP-2523 R laser (R-LD) current

measurement value outside

specified range.

Shut down scanner with

emergency stop button and

restart it. If problems persist,

consult your technical

representative.

PD current value does not converge

within a specified range.

(Causes of the error message)

1. Poorly connected or broken

harness between the laser optical

unit and LDD5 on the LDD27

circuit board

2. Faulty LDD27 circuit board

3. Faulty laser optical unit

1. Connect the harness correctly.

2. Replace the LDD27 circuit board.

3. Replace the laser optical unit.

Link to comment
Share on other sites

W-LP-2526 R laser (R-LD) current exceeds

the specified range.

Shut down scanner with

emergency stop button and

restart it. If problems persist,

consult your technical

representative.

Laser deterioration was detected at

the last post-operational check.

(Cause of the error message)

LD deteriorated.

1. Poorly connected or broken

harness between the laser optical

unit and LDD5 on the LDD27

circuit board

2. Faulty LDD27 circuit board

3. Faulty laser optical unit

1. Connect the harness correctly.

2. Replace the LDD27 circuit board.

3. Replace the laser optical unit.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
 Share

×
×
  • Create New...