Jump to content

Frontier350 distribution mallfunction on 102 paper


manager
 Share

Recommended Posts

I modified a 152 magazine to 102 paper. I registered the magazine to the new paper and print.

The pictures are ok in size and printed but they keep stucking in the distribution sensor, something like it would send or receive them at too high speed.

What could it be?

Link to comment
Share on other sites

  • 2 weeks later...
  • 2 weeks later...

Also check the grease on the distributor. If it is not greased, it is too slow. use a thin layer of silicone grease on the 4 iron sticks of the distributor (the sucker cups are moving on this 4 thin, and approx 20-25 cm long sticks) Probably you have never used the distribution before.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
 Share

×
×
  • Create New...