ebu Posted August 13, 2009 Report Share Posted August 13, 2009 can someone help? in having trouble with my machine it prints lines in magentacolour i dont now whats up with it... i have attached a copy of it..] Quote Link to comment Share on other sites More sharing options...
Guest Posted August 15, 2009 Report Share Posted August 15, 2009 May be its Laser UNIT problem or the Board with controlling the Expossing Section!!!!!!!!! Quote Link to comment Share on other sites More sharing options...
ebu Posted August 15, 2009 Author Report Share Posted August 15, 2009 a technician from fuji company looked at it but doent have any idea... he says he will consult japan for more information.... he changed the laser and the aom but it still does the same..... Quote Link to comment Share on other sites More sharing options...
Guest Posted August 16, 2009 Report Share Posted August 16, 2009 It may be due to LDD PCB. Quote Link to comment Share on other sites More sharing options...
Guest Posted August 16, 2009 Report Share Posted August 16, 2009 Yes i also think that try to cross check the PCB board which controlling Exposers Section. Quote Link to comment Share on other sites More sharing options...
ebu Posted August 19, 2009 Author Report Share Posted August 19, 2009 for real now... if i have to order one board at a time for testing, by the time im done i would be broke...... what is the cheapest way around it? i bought a laser and aom now im stuck with it.. Quote Link to comment Share on other sites More sharing options...
Guest Posted August 19, 2009 Report Share Posted August 19, 2009 check your OLD LASER and AOM with any other Frontier (if possible) Quote Link to comment Share on other sites More sharing options...
Greg Posted August 21, 2009 Report Share Posted August 21, 2009 Hi, This may come from electricity. Do you have an UPS (powerful one); Air conditioner (less possible); fan with adjustible velocity. This kind of tools sometimes create hi frequency noise in electrical set up to 100m distance Greg Quote Link to comment Share on other sites More sharing options...
Christina Rose Posted August 22, 2009 Report Share Posted August 22, 2009 i dont think it could be problem from AOM or either laser unit. because mostly this could be a problem from image processing BOX. open image processing unit and refix all the PCB's.If this happen with frontier 350/370. def. could be FMC20 will be faulty.But i am not sure about frontier 340. only the possible way is to swap the boards. good luck. C.............R Quote Link to comment Share on other sites More sharing options...
sisir Posted August 24, 2009 Report Share Posted August 24, 2009 It may be for FMC or FMB PCB. Please check all the connectors with it. If possible, check the PCBs with another Frontier. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.