Jump to content

370 Back Print Problem


Recommended Posts

I can't seem to get both top and bottom of the back print working. The Bottom is fine but the top is coming out with only some lines here and there.

Removed ribbons, checked for debris around print heads, put ribbons back in. Ribbons are brand new. Can't see anything physically wrong with print heads or the assembly.

Anyone have any ideas? I also switched ribbons around and still the same problem.

Thanks A Bunch!

Link to comment
Share on other sites

  • 4 weeks later...

Cleaned the pins... its comes and goes... my guess is they still maybe dirty. The more prints I run the better it seems to get... but there is a small scratch going down the back of the brint between but back print lines... don't know whats causing it.

Will search a little more to see the cause of the scratch.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Create New...