starprint Posted June 5, 2009 Report Share Posted June 5, 2009 Hi everybody, on my frontier 350 i want to switch off the chemicalbox and use externa tank for replenisher but how i can switch it off ?.....i can not find in the maintenance or on the printer itself,can anybody tell me how to do ? Thank you very mutch in advance. starprinter Quote Link to comment Share on other sites More sharing options...
barsheed Posted June 5, 2009 Report Share Posted June 5, 2009 Hi If need chenge to cp47l or cp43 In LCD press manu 5 time and then press enter and go to 6 system and proc method from here can you switch off the chemical box if you selcte other cp48 sorry for bad english Thank you Quote Link to comment Share on other sites More sharing options...
starprint Posted June 20, 2009 Author Report Share Posted June 20, 2009 Your english is no problem,..i understand what you mean..it worked also..thank you very mutch for your help Best regard starprint Quote Link to comment Share on other sites More sharing options...
Bri Posted July 1, 2009 Report Share Posted July 1, 2009 Not sure why you would want to go to external tanks unless you have a tremendious volume. The box system is great. By going to an external system you not only waste more time but also run the risk of oxidized developer and bleach break down due to extended life in the tank. Any way I was just courious as to why you would want to convert to external tanks?? Best regards, BRi Quote Link to comment Share on other sites More sharing options...
defotoboer Posted July 2, 2009 Report Share Posted July 2, 2009 Hi there....i have big volume and cheaper chemicals this way,..yes the chemical kits are ok without any problem but this way is just cheaper..that's all. starprint Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.