Guest Posted May 20, 2009 Report Share Posted May 20, 2009 hi to all!!!! here is a prob with my Toshiba cpu display of Sp-3000 and i try to replace the toshiba cpu wiht a new 1. but just 1 cable "MCU2" not working with the new 1 now i m using 2 CPU,s 1 is my old TOSHIBA and the other 1 is my new CPU. Toshiba is now only for "MCU2" cable. so is there any solution 4 this?????? plz reply urgently..... Quote Link to comment Share on other sites More sharing options...
sisir Posted May 22, 2009 Report Share Posted May 22, 2009 You should have 2 Firewire port on your new CPU. If so use lower side port as MCU1, Upper side port as MCU2. Quote Link to comment Share on other sites More sharing options...
Guest Posted May 23, 2009 Report Share Posted May 23, 2009 i will do, but no Main Board have 2 firewire ports i try to use firewire card to connect MCU1 with FMPC firewire but SP culd naot start with this kind of connection. Quote Link to comment Share on other sites More sharing options...
Christina Rose Posted May 24, 2009 Report Share Posted May 24, 2009 may be device id conflit. Quote Link to comment Share on other sites More sharing options...
Nand Gw Posted May 27, 2009 Report Share Posted May 27, 2009 DIY MCU Scanner SP3000 but use the old HDD or Ghost HD->HD to use with a new B/M PC. Quote Link to comment Share on other sites More sharing options...
Guest Posted May 27, 2009 Report Share Posted May 27, 2009 Thank you very much mr.NAND GW, is it work???? i was try it to insert an internal firewire card and plug MCU2 in the built in port and the MCU1 the scanner cable in new Firewire card. but when i press SP-3000 power button noting happen anmd no power in my new cpu. thats why i m using 2 cpu (1=orignal toshiba , 2= core 2 duo) GHOSTED HDD install in new PC and just a Power Cable and MCU2 cable in TOSHIBA. Quote Link to comment Share on other sites More sharing options...
Nand Gw Posted May 27, 2009 Report Share Posted May 27, 2009 Press SP-3000 power button and Press MCU Pc Power button. Use M/B support Windows 2000 Sp4 Quote Link to comment Share on other sites More sharing options...
Guest Posted May 27, 2009 Report Share Posted May 27, 2009 thanks fro ur "QUICK" response. i will try it....... Quote Link to comment Share on other sites More sharing options...
sisir Posted June 4, 2009 Report Share Posted June 4, 2009 Did you solved the problem? Quote Link to comment Share on other sites More sharing options...
Guest Posted June 4, 2009 Report Share Posted June 4, 2009 Sorry, but i will not succeeded Yet. I am till Running 2 CPU fro 1 Sp-3000. with little bit Power Own Difficulties. Quote Link to comment Share on other sites More sharing options...
Nand Gw Posted June 6, 2009 Report Share Posted June 6, 2009 I'm not understand your question. Scanner SP3000 will be Start up if have 12 VDC from MCU2 to power supply (PS3). Quote Link to comment Share on other sites More sharing options...
Guest Posted June 6, 2009 Report Share Posted June 6, 2009 thank you very much . Now its Ok n i m using just 1 CPU with my sp-3000 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.