Jump to content

PIC 2.6/370 spooling issue


Recommended Posts

Hi All,

I posted about this issue a while back with no luck but I thought I may try you guys again and see if anyone has any ideas. When I spool for example a group of lets say 25 images to print only 20 will spool to the printer. These figures are just random but my point is that if I spool more than around 5 images at a time then I only get part of them to spool over to the print engine. Any ideas as to what the problem could be.

Ether net card?




I have also reinstalled the software more than once trough the gosting software. Again thanks and if you guys and gals have any suggestions please let me know.

Best Reguards to all,

Sabrina Smith

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Create New...