Kevbo37 Posted April 13, 2009 Report Share Posted April 13, 2009 Help Please! I keep having a paper jam in the exit section of my Frontier 340. I have cleaned and adjusted the exit section. I have checked the sensor. I have replaced the first 2 rollers in the P1 crossover. Everything looks great but I still get these annoying paper jams. Thanks Quote Link to comment Share on other sites More sharing options...
surviving Posted April 13, 2009 Report Share Posted April 13, 2009 check the racks if they are tight Quote Link to comment Share on other sites More sharing options...
Kevbo37 Posted April 14, 2009 Author Report Share Posted April 14, 2009 yes the racks are tight and seated completely and the rollers are in good shape. The paper seems to jam as it is entering the first crossover, before it even gets wet. Quote Link to comment Share on other sites More sharing options...
surviving Posted April 14, 2009 Report Share Posted April 14, 2009 check the guides of all the racks developper bleaching fixer and washing racks may be one is not correctly pushed Quote Link to comment Share on other sites More sharing options...
Christina Rose Posted April 15, 2009 Report Share Posted April 15, 2009 check the transporting system. if possible just open the magazine door. lock the door interlock and check the movements of the prints. also push a length of paper into the exit section and make sure there is no foreign matter inside the belt and exit section. Quote Link to comment Share on other sites More sharing options...
Kevbo37 Posted April 17, 2009 Author Report Share Posted April 17, 2009 Thanks for the help but I have found the problem. The helical gear which drives the shaft that drives the P1 crossover has been slipping on the shaft. It is hidden on the front end of the P1 crossover. The cross pin has been intermittently slipping causing the P1 to not take the paper from the exit section. I installed a spacer to make the cross pin sit deeper in the gear. Man, I am glad to get that fixed! Quote Link to comment Share on other sites More sharing options...
Christina Rose Posted April 19, 2009 Report Share Posted April 19, 2009 me too..;-) Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.