abd Posted March 2, 2009 Report Share Posted March 2, 2009 the error is "R laser(R-LD) current messurment value outside the specieffied range " please what is the solution my machine is not currently working Quote Link to comment Share on other sites More sharing options...
Christina Rose Posted March 2, 2009 Report Share Posted March 2, 2009 check LDD board. Quote Link to comment Share on other sites More sharing options...
abd Posted March 3, 2009 Author Report Share Posted March 3, 2009 somebody said me you can enter R laser(R-LD) value but how can i enter this value Quote Link to comment Share on other sites More sharing options...
Mr_Screwdriver Posted March 3, 2009 Report Share Posted March 3, 2009 afraid you cant enter a value, sounds like your laser has come to the end of its life. I would remake electrical connections to laser unit (using antistatic precautions), reboot, then after an hour do a laser temp correction. if still get error - the laser unit has gone past its usefull life !! Quote Link to comment Share on other sites More sharing options...
sisir Posted March 6, 2009 Report Share Posted March 6, 2009 The Laser Unit is gone. I can suggest to check that if the machine is in warranty period. Fujifilm agreed to give 2 years warranty for the problem. Further details, mail me. sisir.fuji@gmail.com Quote Link to comment Share on other sites More sharing options...
Christina Rose Posted March 7, 2009 Report Share Posted March 7, 2009 its possible to edit R laser limit current value. but that will store permanent . may be you can print for a while. but each restart again problem will come. also u need to do paper setup and some other adjustments. in between also error may come. because whenever R laser current reaches the limit value, error will come. better remove laser unit and check with another frontier. at least confirm the problem. Quote Link to comment Share on other sites More sharing options...
Kevbo37 Posted April 7, 2009 Report Share Posted April 7, 2009 email me at kevbo37@msn.com I can probably help. Kevin Waller Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.