Jump to content

w 2418 messsage error


Recommended Posts


did you check your sensor?  There is a input/output section in your service menu to check if your sensors are working correctly.  I they are working correctly, there should be a section where you can test your motors if they are working correctly or not.  Let me know if that helps at all,

Thanks, Eoughphily

Link to comment
Share on other sites

  • 14 years later...

W-2418 means Initializing of distribution section nip(M662/D662/M663/D663) failed. Distribution section nip home position is not detected. Error can cause :
Poorly connected or broken harness
Faulty D662/D663
Faulty M662/M663
Faulty distribution section nip mechanism
Faulty PDA23 circuit board
Faulty CTL23 circuit board

Open covers and block sensors.
Go to input check. Test sensors ( when they opened and closed )
Go to output check.  Test motors.
Check distributor section nip mechanism. Might be something broken there.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Create New...