ROBERTCARDIN Posted March 14, 2009 Report Share Posted March 14, 2009 3 days ago I have this problem: at drawing the pictures come out with scratches : see photos thank you in advance for your help[face=Arial][/face] Quote Link to comment Share on other sites More sharing options...
Christina Rose Posted March 15, 2009 Report Share Posted March 15, 2009 is it from negative or digital? it could be a noise. nothing to worry. Does matter if its come frequent. CR Quote Link to comment Share on other sites More sharing options...
ROBERTCARDIN Posted March 15, 2009 Author Report Share Posted March 15, 2009 is digital but when I printed 50 photos or more there's no spot Quote Link to comment Share on other sites More sharing options...
MasterLaser Posted March 16, 2009 Report Share Posted March 16, 2009 Do you have same phenomena on negative printing? Or just on digital? Quote Link to comment Share on other sites More sharing options...
ROBERTCARDIN Posted March 16, 2009 Author Report Share Posted March 16, 2009 ok the problem from a digital and negative, and thank you Quote Link to comment Share on other sites More sharing options...
Nand Gw Posted March 16, 2009 Report Share Posted March 16, 2009 If you have FMPC this pronlem it may be IEEE 1394 card and Ram or M/B. Quote Link to comment Share on other sites More sharing options...
MasterLaser Posted March 17, 2009 Report Share Posted March 17, 2009 You have trouble with some board in IPS in SP. Most probably GLO or GIP board Quote Link to comment Share on other sites More sharing options...
Allen Posted March 17, 2009 Report Share Posted March 17, 2009 check your ground , and all connections first. Quote Link to comment Share on other sites More sharing options...
ROBERTCARDIN Posted March 17, 2009 Author Report Share Posted March 17, 2009 A month ago I changed the firewire cable from the original 12 meter with a regular 1.5 meter is that it can be causing this problem Quote Link to comment Share on other sites More sharing options...
Christina Rose Posted March 18, 2009 Report Share Posted March 18, 2009 its better make an earth connection between scanner and printer if you are not using original fire wire cable. (connect a single wire between scanner and printer body) also ensure Printer is well earthed. regards, CR Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.