burkina Posted January 10, 2009 Report Share Posted January 10, 2009 anybody has any soluton for these light source errors please.FRONTIER 350 Quote Link to comment Share on other sites More sharing options...
Christina Rose Posted January 10, 2009 Report Share Posted January 10, 2009 please mention what is the error. its bit difficult deal with error code. Quote Link to comment Share on other sites More sharing options...
MasterLaser Posted January 14, 2009 Report Share Posted January 14, 2009 It seems that CCD unit is broken. Did you cleaned optical path from reflector up to ND filter and CCD unit? PLS first do that. And replace the light bulb with new one (use Philips, I had some problems with Osram). Then you do ND filter density measurement, ND filter dust check, Light source aperture table, Light source check and Focus measurement with film. Id you cannot do that, you have trouble with CCD or CDS board. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.