maviler Posted December 3, 2008 Report Share Posted December 3, 2008 Hi all Hopefully someone can help me here. I have Frontier 350 and recently have been having this message come up. W-2632 PS2 solution tank leval has fallen temperature adjustment stopped. I have checked there is no leaks and PS solution evaporation is yes. The problem corrects itself after about 5 minutes or I have to add FRSS solution to the tank itself. I think it may be a pump or sensor problem. Could someone point me to the right place to isolate this fault and how to correct it. Many Thanks Quote Link to comment Share on other sites More sharing options...
Christina Rose Posted December 4, 2008 Report Share Posted December 4, 2008 just try to clean the level sensor....which is just besides the filter gap...just remove it and clean gently.. check PSR pump output also. Quote Link to comment Share on other sites More sharing options...
maviler Posted December 4, 2008 Author Report Share Posted December 4, 2008 Thanks for that. PSR Pump is fine. Cleaned the sensor and seems to have worked not had a problem since. Thanks Quote Link to comment Share on other sites More sharing options...
vaidean.radu Posted December 15, 2008 Report Share Posted December 15, 2008 You need to set your Evaporation Corection Rate setting also or the problem will come back. Regards Radu Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.