sisir Posted September 21, 2008 Report Share Posted September 21, 2008 I am facing a problem in A1 software installation in Frontier 350 and 370. While I newly installed A1 software, I also B1 software. But I did not get Full Frame function ON, it is always remaining grey colored. Can anybody help me? Quote Link to comment Share on other sites More sharing options...
Christina Rose Posted September 21, 2008 Report Share Posted September 21, 2008 hi, i have some doubt that 127 x 90 is not at all a proportional size. because it does not come 2:3 full frame ratio. try to check with 152x102 size. also if u want little more picture area do adjust print size magnification.you can adjust with any paper size. also check any other print size full frame print does active? or check while BMP export does it active or not? i hope after A1 installation complete B1 standared installation also. one more thing always use the B1 comes with frontier 350/370. regards Quote Link to comment Share on other sites More sharing options...
sisir Posted September 27, 2008 Author Report Share Posted September 27, 2008 Thank you for your suggestion. But the problem is not solved. Quote Link to comment Share on other sites More sharing options...
mwalford Posted October 31, 2008 Report Share Posted October 31, 2008 Need to select Full Frame ON before loading film. (From memory... It's been years since I used Film and A1) Quote Link to comment Share on other sites More sharing options...
mwalford Posted October 31, 2008 Report Share Posted October 31, 2008 Also, check what setting you have for "Cropping" try Centre Cropping On/Off before loading film and try changing Full Frame with either "Cropping" setting. Quote Link to comment Share on other sites More sharing options...
sisir Posted October 31, 2008 Author Report Share Posted October 31, 2008 Thanks all of you for suggestion. I have solved the problem. The problem was for wrong combination of A1 and B1 software version. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.