Sijo Sebastian Posted June 12, 2008 Report Share Posted June 12, 2008 Hello Guys Any body knows what exactly need to make an FMPC for fuji 390 machine? Quote Link to comment Share on other sites More sharing options...
Christina Rose Posted June 14, 2008 Report Share Posted June 14, 2008 hi, you need two firewire cards IEEE 1394 ( Different makes). Two IEEE Fire wire cable. Eprom ( need to fit in processor CTL 20) D20 FMPC application Software FMPC driver CD. A1 7.7 C4-C5 any version 5.5 is best. P4 computer with 2GB Memory atleast. Windows Xp with SP2 operating system. and a technical personal who knows how to Install FMPC........... regards, kaitedo 1 Quote Link to comment Share on other sites More sharing options...
Sijo Sebastian Posted June 15, 2008 Author Report Share Posted June 15, 2008 Thanks Baiju I am little bit confused in this case. because the above mentioned items are required for LP1500/2000. I heard in 390, I need CTL board which supports the FMPC. I am not sure. Do you have any idea about this matter! Quote Link to comment Share on other sites More sharing options...
Christina Rose Posted June 16, 2008 Report Share Posted June 16, 2008 hi Sijo, Mmmmm....like you now i am bit confused.but as i went thru the manual, never seen anywhere that frontier 390 need special CTL which should support FMPC. anyhow i will check and get back to you sooner. regards. Quote Link to comment Share on other sites More sharing options...
Sijo Sebastian Posted June 18, 2008 Author Report Share Posted June 18, 2008 thanks. Quote Link to comment Share on other sites More sharing options...
Nand Gw Posted June 19, 2008 Report Share Posted June 19, 2008 System Disk A1 just have 6.6-OE-XXX of FR390 so A1 6.6 not support FMPC and FR390 (Printer LP2500) not support FMPC I & II but Scanner SP2500 Maybe use with other printer (LP1500/2000/5000/5500/5700) via FMPC. Quote Link to comment Share on other sites More sharing options...
Sijo Sebastian Posted June 19, 2008 Author Report Share Posted June 19, 2008 Do you have any idea how to use SP2500 with LP1500/2000. I tried to connect SP2500 with LP 1500/2000. but I found the softwares are not compatible, means I cannot use 350/370 software in 390 and vice versa. Do you have any solution for that? I have 390 A1 7.0 ver. thanks Quote Link to comment Share on other sites More sharing options...
Nand Gw Posted June 20, 2008 Report Share Posted June 20, 2008 A1 Ver. 7.0 Fr390 not support FMPC. and SP2500 connect with LP1500/2000 can not, must be set via FMPC. Quote Link to comment Share on other sites More sharing options...
Sijo Sebastian Posted June 24, 2008 Author Report Share Posted June 24, 2008 Frontier 390 ver.7.7 is working fine with LP controller. How can I hook up PIC and DI station with LPC? Quote Link to comment Share on other sites More sharing options...
Nand Gw Posted June 24, 2008 Report Share Posted June 24, 2008 Install A1 7.7 for user version up and check menu 41F if output device can be to select FMP Controler. You can setup FR390 via FMPC. Quote Link to comment Share on other sites More sharing options...
Sijo Sebastian Posted June 25, 2008 Author Report Share Posted June 25, 2008 LP2500 working fine with LP Controller. How can I hook up DI station or PIC station with FMPC? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.