Lex Posted June 4, 2008 Report Share Posted June 4, 2008 Hi all, I'm getting a problem at a customers' place... When he load a Memory Card or a DVD in his Frontend to work out the photos, it takes about 6-7 minutes to opened up the whole Memory Card ( 128 pictures in it).. For the DVD also it takes an eternity to opened up.. Although when i'm gonna work to adjust density, colour, etc ...its slow.....WHY?????? I've Format the Pc and Re-install C4-C5 also i've installed an anti-virus. 1Gb of memory the pc itself is working a rapid one Only when i uses the Fuji Imaging that it is slow.. Is it the Pictures itself that are in high resolution?? Koz most photographs are using latest technologies nowadays... Or is it a problem with the system..???? Quote Link to comment Share on other sites More sharing options...
Christina Rose Posted June 5, 2008 Report Share Posted June 5, 2008 hi, if the images taken with high resolution and especially reading from DVD or any other media, then there must be a delay. try to increase PC's RAM 2 GB or 4GB. then conversions will more fast. also check the NIC link speed. if its selected as AUTO, please change to 100 MBPS full or whatever high speed available.. regards.. Quote Link to comment Share on other sites More sharing options...
Nand Gw Posted June 19, 2008 Report Share Posted June 19, 2008 Install PC M/B driver incomplete. Quote Link to comment Share on other sites More sharing options...
andychow138 Posted June 19, 2008 Report Share Posted June 19, 2008 hi Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.