NeilT Posted January 8, 2004 Report Share Posted January 8, 2004 Are you the owner of any Fuji equipment? are you thinking of purchasing any equipment? Do you have any problems with the equipment that you have? The mini lab help site is here for you to take part in, please feel free to post up any questions that you may have. Do not feel worried if you have a problem and feel alone, as there may be be other people that are suffering from the same problem. By sharing our experience this will be a benefit to us all. Quote Link to comment Share on other sites More sharing options...
SueLloyd Posted January 11, 2004 Report Share Posted January 11, 2004 Hi We have a Fuji Frontier 330, I'd be pleased to hear from anyone with this same piece of equipment to exchange views/problems? Sue Quote Link to comment Share on other sites More sharing options...
JoanWest Posted February 10, 2004 Report Share Posted February 10, 2004 We have had a Fuji Frontier 350 and Kiosk for over 3 years, it does print from print and prints from all digital media and is networked to individual computers enabling other print work to be sent dirctly to it. I would advise anyone thinking about a kiosk to make the purchase sooner than later - just our print from print work from it last year was over Quote Link to comment Share on other sites More sharing options...
NeilT Posted February 10, 2004 Author Report Share Posted February 10, 2004 Although not a Fuji owner.. I have to agree with Joan over the issue of a kiosk, this was been one of the best moves that we have made, and was proven to be a winner.. so far ! Quote Link to comment Share on other sites More sharing options...
alpaisley Posted May 12, 2004 Report Share Posted May 12, 2004 We have had a frontier 370 for 4 years with a kiosk and merlin. we have just upgraded to the frontier 375 by installing the new sp-3000 scanner as well as upgrading the kiosk and merlin. This has increased production as well as quality and i would advise anyone with a sp 1500 or sp 2000 to have a lookHas anyone got the recent werlin(hardware and software) and if so do they have any issues with it Quote Link to comment Share on other sites More sharing options...
NigelTrigwell Posted September 7, 2004 Report Share Posted September 7, 2004 ive got the new sp3000 and merlin and im very pleased with it. We do a lot of digital so having the much faster converting times is great. And we have had no promblems at all mith it. Quote Link to comment Share on other sites More sharing options...
waseem2005 Posted November 9, 2005 Report Share Posted November 9, 2005 Hi Please can anyone help me with the instruction to install the softwares for the Frontier 330 (machine,controller) carefully step by step, how to connect them in a workgroup. I faced a problem in installing the system (A1,C2,C4/C5). regards. Quote Link to comment Share on other sites More sharing options...
CPAC Posted April 30, 2007 Report Share Posted April 30, 2007 Hmm , we Had a resent (8mths) Crash where all drives failed on the DI and The Frontier. I Think that it was rigged and in some way sabotaged by the tech/fuji. however we reinstalled the software on New HDD's and had it up and running again in less then 8 hours. How we done it was no small feat though and there is some Technical issues that require ringing a technician regarding DPC's and the DI Unit as well as for the main Frontier itself etc. Good Luck Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.