northernlab Posted January 18, 2012 Report Share Posted January 18, 2012 Morning all Yesterday my Kodak 8810 printer displayed 'temp sens err 05' and won't print. Is it because the shop is a bit cooler at this time of year or is it a replacement sensor ? Anyone any ideas / advice, Many thanks Quote Link to comment Share on other sites More sharing options...
Snooper35 Posted January 25, 2012 Report Share Posted January 25, 2012 The RIBBON CABLE for the THERMAL HEAD is disconnected or malfunctioning. 1. Check that the RIBBON CABLE CN25 on the THERMAL HEAD and the CONTROLLER BOARD are connected correctly. 2. If necessary, install: a. new RIBBON CABLE b. new THERMAL HEAD AY The THERMAL HEAD AY is malfunctioning. Install a new THERMAL HEAD AY. The JUNCTION BOARD AY is disconnected or malfunctioning. 1. Check that the CONNECTORS on the JUNCTION BOARD AY and the CONTROLLER BOARD are connected correctly. 2. If necessary, install a new JUNCTION BOARD AY. The CONTROLLER BOARD is malfunctioning. 1. Upgrade the FIRMWARE for the PRINTER. 2. If necessary, install a new CONTROLLER BOARD. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.