pepe21 Posted October 29, 2011 Report Share Posted October 29, 2011 I have two with new paper but it wont take it since I need to upgrade the firmware but cant since I dont have old ribbon or paper..is there another way to upgrade without the old ribbon? Quote Link to comment Share on other sites More sharing options...
Dave S Posted October 30, 2011 Report Share Posted October 30, 2011 A lot of people have had issues with this. The solution that worked for me was to remove the printer from the kiosk and connect and install it to a normal PC, then load the new ribbon firmware update on the PC. Put the printer back into the kiosk and it worked! Quote Link to comment Share on other sites More sharing options...
blusther Posted October 31, 2011 Report Share Posted October 31, 2011 There should not be any problem to update with old ribbon, just ignore this message that the printer has to be in Ready state. If you get an error message on your kiosk then shoudl should do what Dave said. Update with external PC. Here the link with the printer driver and firmware for PC. http://www.kodak.com/global/en/service/software/professional/photoPrinter6800_6805/photoPrinter6800Software.jhtml?pq-path=14966 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.