jlzaytso Posted May 4, 2010 Report Share Posted May 4, 2010 Hello all, We have a g4 kiosk and after trying to upgrade the card reader software, the system will only boot into Kioskuser1. I have tried to restore it from F11, but there are no backups available. Does anyone have a ghost image or restore CD they are willing to share? Or any advice on what I can try next? This is our only kiosk or I would ghost it myself. Thanks for all your help! Jessica Quote Link to comment Share on other sites More sharing options...
printerman Posted May 24, 2011 Report Share Posted May 24, 2011 Jessica, It's not as simple as that. Simply Installing any software may cause a bigger hole for to to fill. The easy and best way to get all the correct software is to look at the rear of the machine, where the serial number is on the main PC. Youb will see a PC number , example PC15 / PC17 Or similar. If you have a G4X machine, one of the latest ones, then it will be either a PC20 / PC25 Which one do you have.. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.