Jump to content

Problem with MASTERFLEX connection


Recommended Posts

Hi people!.

I have connected a MASTERFLEX connection between a G4 kiosk with KPK 2.2 and a personal computer.

I have follow all instructions about this (installed the MFD enabler 1.0, and make all folders inside the PC to store all photo works) but it does not work properly, I mean, when I choose to make some 10x15 picture for example and the process is done,the kiosk shows me the ID number of the client but when I´m going to find this photo into the 10x15 folder into de PC,it does not appear.

What I did I do wrong??


Link to comment
Share on other sites

Kiosk will send directly to the Hot Folders and appear on the order display if you are using the MFD1008 you would need to replace the hotfolders ini file.

I assune your PC talks to the MFD both ways.

Benifit of the Hotfolders is if a customer orders various quantities from the Kiosk the MFD pickks this up.

We have been doing it this way for years.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Create New...