Teds Posted June 30, 2010 Report Share Posted June 30, 2010 Hi I have a 6800 printer and its displaying paper jam 05, the paper advances as far as the last roller and stops. Any ideas whats causing this Thanks Quote Link to comment Share on other sites More sharing options...
joshi Posted June 30, 2010 Report Share Posted June 30, 2010 hi friend pls check paper edge sensor is dirty/ malfunction paper feed main motor malfunction paper feed sub motor malfunction....... Quote Link to comment Share on other sites More sharing options...
blusther Posted July 3, 2010 Report Share Posted July 3, 2010 It means that the first sensor (lead edge) detects the paper but then the print position sensor below the metal plate (fixed with 2 screws) just before the cutter assy doesn't see the paper. Quote Link to comment Share on other sites More sharing options...
joshi Posted July 4, 2010 Report Share Posted July 4, 2010 change pinch roller motor Quote Link to comment Share on other sites More sharing options...
Teds Posted July 5, 2010 Author Report Share Posted July 5, 2010 I cleaned the sensor under the two screws as it was dusty but still same problem, so will try pinch roller motor next Thanks Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.