BOOTSMAN0941 Posted June 6, 2010 Report Share Posted June 6, 2010 a g3 is not starting and asking for a enablement cd what does that mean? and were do i get one from or make one? Quote Link to comment Share on other sites More sharing options...
davidlam Posted June 9, 2010 Report Share Posted June 9, 2010 show us the exact [error screen] picture, please. Quote Link to comment Share on other sites More sharing options...
pepe21 Posted June 9, 2010 Report Share Posted June 9, 2010 that's odd..was it working before? Quote Link to comment Share on other sites More sharing options...
davidlam Posted July 3, 2010 Report Share Posted July 3, 2010 upset with no reply but scream loud .. Quote Link to comment Share on other sites More sharing options...
blusther Posted July 3, 2010 Report Share Posted July 3, 2010 tell us a bit more, have you new installed the software? If it was a version older than 1.x it will ask for an enable CD (any enable CD is usefull). Quote Link to comment Share on other sites More sharing options...
frenchman Posted July 3, 2010 Report Share Posted July 3, 2010 If your kiosk ask for cd enabler ,this kiosk run with the older application " KPM V 3.X/4.X/5.X " The program software are been installed but ,any enabler ( printer driver ,minilab connection and various option.....) regard frenchman Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.