BOOTSMAN0941 Posted June 8, 2010 Report Share Posted June 8, 2010 Can I setup my G3 like the diagram below and if so how can I do it and what programs do I need to enable this on my g3 I have looked at the network commection section on the g3 and done a ping/ip address check and it finds the network and I have made a share folder on the computer to send the pictures from the g3 but what else do I need to do. +----------+ Ethernet +-----+ Ethernet +-------------+ | G3 Kiosk |---------------------| hub |---------------------| Computer | +----------+ +-----+ +-------------+ | | USB Cable | +--------+ | Printer | +--------+ Any help on this will be great? many thanks, Quote Link to comment Share on other sites More sharing options...
frenchman Posted June 8, 2010 Report Share Posted June 8, 2010 your printer is a minilab ? and wish minilab frenchman Quote Link to comment Share on other sites More sharing options...
BOOTSMAN0941 Posted June 8, 2010 Author Report Share Posted June 8, 2010 No the printer is not a minilab printer, it the kodak 6800 photo printer that is normally attached to the g3. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.