clik Posted May 18, 2009 Report Share Posted May 18, 2009 Hello, i want connect my epson 7800 on G4 Kiosk, is possible? Thanks Quote Link to comment Share on other sites More sharing options...
frenchman Posted May 18, 2009 Report Share Posted May 18, 2009 if you run with the last program V 1.X/ 2.X go to setup /diag/diag service / tool for enabler utilty and enable the windows printer enabler ,printer serial enabler ( don't enable the receipt printer ) and check if you see anything about the epson tracer . frenchman Quote Link to comment Share on other sites More sharing options...
clik Posted May 18, 2009 Author Report Share Posted May 18, 2009 I have espon 7800 software in volume "E" i have installed it, in the panel control i see epson 7800 printer but i can't see the printer in enabler panel in software kodak, in diagnostic menu! Quote Link to comment Share on other sites More sharing options...
frenchman Posted May 18, 2009 Report Share Posted May 18, 2009 Oops , i have forget the password for the diagnostic services menu 789632 frenchman Quote Link to comment Share on other sites More sharing options...
kuhawi Posted June 16, 2009 Report Share Posted June 16, 2009 hi, I had a question... someone from tetenal send your link to me and told me, that I can use your manual to fix my epson 7800 to g3 with software 2.0 I tried, but it doesn't work. so I find no "windows printer enabler and printer serial enabler. can you please help me??? Many thanks and greetings kurt Quote Link to comment Share on other sites More sharing options...
kuhawi Posted June 16, 2009 Report Share Posted June 16, 2009 so, I post some sreen picture from my G3, to see the enabler I have... Quote Link to comment Share on other sites More sharing options...
jerm8832 Posted June 1, 2010 Report Share Posted June 1, 2010 I do not see a windows printer enabler. Could you please elaborate more on this topic. I have a Epson 7800, and it would be awesome to connect one of these to my kiosks. Quote Link to comment Share on other sites More sharing options...
isaac Posted June 2, 2010 Report Share Posted June 2, 2010 Hi you need enabler ver 1.0 I had the same problem Quote Link to comment Share on other sites More sharing options...
Trevor brown Posted June 2, 2010 Report Share Posted June 2, 2010 The epson wide format printers are only designed to run with G3/G4 kiosk when connected through a APEX dry lab . The print size option on the new software also has to be on the APEX Quote Link to comment Share on other sites More sharing options...
jerm8832 Posted June 2, 2010 Report Share Posted June 2, 2010 No APEX dry lab here. I run a Noritsu 3300. Oh well. It would have been cool to set up my wide format printer with my 4 kiosks. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.