Jvc1986 Posted July 4, 2009 Report Share Posted July 4, 2009 Anyone have the G4 sw to share, we have it installed, but I want to change some enablers, therefore I need the software. Quote Link to comment Share on other sites More sharing options...
Trevor brown Posted July 4, 2009 Report Share Posted July 4, 2009 Which version software are you using, from V1.5 the enablers are in the diagnostoc secrion then service diagnostics password 789632 Quote Link to comment Share on other sites More sharing options...
frenchman Posted July 4, 2009 Report Share Posted July 4, 2009 If you want change enabler's without the software go to setup menu/diag services/789632/tool for enabler. But if you don't go by this way ,try with a key board and mouse to reload the basic backup =>restart the kiosk with the keyboard and the mouse ,when the kiosk is restarting press F12 to start the IBM rescue/recovery ,wait a minute ,ibm rescue is loaded ,search the backup by Date (Date KPK V1.X or V2.X) this backup is maked when the software or upgrade is realised for the first time,is a basic instalation without option or enabler ,like minilab enabler or other services good luck frenchman Quote Link to comment Share on other sites More sharing options...
Jvc1986 Posted July 5, 2009 Author Report Share Posted July 5, 2009 We use v 1.5, ill try the F12 thing, thanks! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.