aliz Posted January 25, 2009 Report Share Posted January 25, 2009 Can any body provide Qss 2711 DLS Softwear Quote Link to comment Share on other sites More sharing options...
mike11918 Posted January 30, 2009 Report Share Posted January 30, 2009 What exactly do you need? I also have a 2711 DLS and I have everything to restore the PC and install the kodak DLS 3.0LA software. Quote Link to comment Share on other sites More sharing options...
Retired Posted January 30, 2009 Report Share Posted January 30, 2009 I already have ALL DLS V3.0 iso disk files plus the MP-1600 ghost drive files on the web if you need the link PM me. I do have the recovery CD too but I have not found a way to make the floppy COPY work. Quote Link to comment Share on other sites More sharing options...
pskaro Posted January 31, 2009 Report Share Posted January 31, 2009 Hi Retired, I am guessing that my post http://www.minilabhelp.com/forum/Blah.pl?m-1232605950/ did not help you. Can you give me more detail, because I used WinImage for exactly what you need. Quote Link to comment Share on other sites More sharing options...
CK Posted February 11, 2009 Report Share Posted February 11, 2009 I had the same problem and have got dos boot up disk, and there arfter you can run the ghost application from dos. Any one intersted PM me and I wil respond. Quote Link to comment Share on other sites More sharing options...
kero_240123 Posted July 30, 2018 Report Share Posted July 30, 2018 (edited) please if can help me i have bought a qss 2701 but the pc hard disk does not work and the internal printer pc is ibm work with ver. h003 i am kind of new in this field and when i searched i found two option noritsu qss2701 managment software and kodak dls software to be honest i do not know which one will work on it please advice me Edited July 30, 2018 by kero_240123 Quote Link to comment Share on other sites More sharing options...
Dave S Posted July 30, 2018 Report Share Posted July 30, 2018 If it has the IBM PC it was a 2711 running Kodak DLS software. The 2701 had a control station with 2 PC's built in to it. Personally I think you will be wasting time with this machine, it was not a great machine when it was new! Now it's 20 odd years old it will be terrible! You will spend more time fixing it than printing with it! You'd be much better of with something like a Noritsu 3201 instead. Quote Link to comment Share on other sites More sharing options...
kerolos.fawzy Posted October 8, 2018 Report Share Posted October 8, 2018 thanks dave s so much yes it is 2711 dls please if any one can send the DLS V3.0 iso disks many thanks Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.