NortSur Posted September 1, 2012 Report Share Posted September 1, 2012 Hello, I'm trying yo center the image. The image is to large, how can I reduce it? On a 1670 Thanks Quote Link to comment Share on other sites More sharing options...
ralphmalph Posted September 7, 2012 Report Share Posted September 7, 2012 not sure if this is what you are trying to do If you go into the optique.ini file find the following POS_BARILLET=1 PRESENT=1 POS_THEORIQUE=3481 RAPPORT_AGRANDISSEMENT=15.270000 CENTRAGE_X=0.000000 CENTRAGE_Y=0.000000 If you move the number in the line RAPPORT_AGRANDISSEMENT=15.270000 it will bring the magnification in and out, I don't remember which way to go so you have to experiment. Make sure you move it slightly because small movements in these numbers moves the magnification a lot. Example start with 15.28000 see which way the magnification goes and work that way also make sure you go to the lens that has PRESENT=1 In the 1670 there are a few empty slots for other lenses. the will say PRESENT=0. Hope this helps, I have to adjust all my magnification on my 1670 and 1550 do to package printing. The DKS machines have way to much bleed. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.