KenTen Posted May 18, 2012 Report Share Posted May 18, 2012 Hi everyone, Does anyone have a trick or tip for replacing the densitometer sticker on a DKS1710? I got one and I'm ready to replace it. I removed the top of the dryer and it looks like I'll have to remove a lot of parts to get to the silver roller. Am I approaching this the right way? Thanks in advance for help, Ken Quote Link to comment Share on other sites More sharing options...
CAMERA HOUSE Posted May 19, 2012 Report Share Posted May 19, 2012 yes. u r on right track. Also remove two side plates holding rollers. then remove some rollers. Quote Link to comment Share on other sites More sharing options...
KenTen Posted May 21, 2012 Author Report Share Posted May 21, 2012 Thanks for the reply. I'll dig in when I slow down. Quote Link to comment Share on other sites More sharing options...
Nilesh Posted May 22, 2012 Report Share Posted May 22, 2012 dear ken, no need to remove all only you need to remove is sorter unit,after removing sorter unit you can able to stick the sticker on big steel roller. nilesh mehta india +91 9324032520 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.