Jump to content

Bleach temperature not heating on time


emmaachile
 Share

Recommended Posts

move your blich filter up and punch it down to your circulation pump cap. I'm serious :)  do it couple time and then put your finger at the top of it and keep doing that till you sense the vibration on your finger , just to get an idea what type of vibration you can touch dev or stb to see the vibration and the compare it with bl , I do believe your circulation pump is dirty or maybe the spinner is too old .:) good luck

Link to comment
Share on other sites

i had the same problem...but the timer earlier about 1.6 hour. then the cd and stb tanks warm it up....   also my circulation pump has stopped and i got no errors about it...  changed the little wheel  or disk under spin or rotor...( not sure i spok this right :) ) and its working again:)   most likely you have to change the heater... unless you happy with the timer earlier :)  

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
 Share

×
×
  • Create New...