damooose Posted July 15, 2011 Report Share Posted July 15, 2011 Had a very unusual error occuring today in mid production (temperture has exceeded +3 degrees restart machine or continue) However all temps showed normal but had turned red so continued printing I then noticed all the temps started dropping till I could no longer print and the 1550 when into heating mode Tried all the usual things IE filters, rep pumps, reebooting but to no avail temps still glowed red bar the dev which was blue and heating. After an hour or so all the temps went green heaters turned on and away we went again. So this generally means something is about to fail and i would like to fix it before it does anybody got an idea what it may be thanks in advance.. Quote Link to comment Share on other sites More sharing options...
pskaro Posted July 15, 2011 Report Share Posted July 15, 2011 Probably bad circulation in DEV tank, check the circulation pump, clean it and check or replace the turbine washer bellow the pump turbine Quote Link to comment Share on other sites More sharing options...
damooose Posted July 27, 2011 Author Report Share Posted July 27, 2011 Thanks pskaro actually turned out to be the bleach tank.. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.