grace_photo Posted April 4, 2011 Report Share Posted April 4, 2011 When printing 203x300mm white border photos, the image appear to be rotated about 2 degree counter-clockwise and 2mm shift right. 4x6 white border photo seems fine. What parameters need to be adjusted? Thanks. Quote Link to comment Share on other sites More sharing options...
Ridge Posted April 4, 2011 Report Share Posted April 4, 2011 Open the paper magazine and adjust the axel holders little..!! Quote Link to comment Share on other sites More sharing options...
Shahab Shahami Posted April 8, 2011 Report Share Posted April 8, 2011 If you checked the paper magazine and the guides are adjusted but still have the issue, you have to go to S.U mode with password TEC , then at the top look for centring tab and when you open the tab you need to put the 4x6 mag at the top and 8x10 mag at the bottom and run the test, if you need more help on how to do the process you can use the help tab on the right side of the page , TAKE A GOOD BACKUP before you do anything, again TAKE A GOOD BACKUP and thats really important , other wise your next post would be how I can set my agazine and on and on . Good Luck, BACKUPPPPPPPP dont forget. ) Quote Link to comment Share on other sites More sharing options...
CAMERA HOUSE Posted April 16, 2011 Report Share Posted April 16, 2011 Go to SU and do the centering. How to... is explained there. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.