Richard Domeris Posted December 21, 2010 Report Share Posted December 21, 2010 Hi I have a LCD problem 4mm line horizontal on jumbo prints I have replaced the LCD before which has cured the fault where can I purchase a new one or does anybody know how else to solve problem Quote Link to comment Share on other sites More sharing options...
GPKE Posted January 11, 2011 Report Share Posted January 11, 2011 I got the same problem, Paskro said it is 24 pixel problem. I am suffering. Quote Link to comment Share on other sites More sharing options...
drconservative Posted January 13, 2011 Report Share Posted January 13, 2011 Hello, You can try doing a Flicker Adjustment, but I am not sure where to get another one. If you move the point value up 3 points on the flicker you may notice a difference. If you do not notice a difference then it will need to be replaced again. I hope this helps. Quote Link to comment Share on other sites More sharing options...
worker Posted January 13, 2011 Report Share Posted January 13, 2011 Hi , if you disconnect the sequencer board overnight(all connectors),power the machine down in the morning before re-connecting the board,the static may discharge for a while,if it continues try changing the sequencer board, Hope this helps Cheers Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.