Jump to content

printing issue with 8x10 & 5x7


PMP Photo
 Share

Recommended Posts

We have the 1510 when we print a 8x10 & 5x7 the color is all off.  I have done a paper setup of the 8" & 5" paper before we print on the paper.  Usually it comes out very mag and very light(most of the time).  The monitor has been calibrated.  The 4x6 comes out perfect.  Is there a step that I am missing somewhere?  It is a real pain to have to guess on the color and the hope that it comes out.  The monitor says one thing and the prints come out different.  

Link to comment
Share on other sites

If you (or somebody else) have external densitometer Status A then just read any paper setup (reasonable grey) white and grey areas and then write it down on that setup card and that will become new calibration target.

Do not forget when doing calibration to enter new values in the white and grey fields in S.U.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
 Share

×
×
  • Create New...