Jump to content

Image box Networking WorkflowDlab1


PHOTOLABPART.COM
 Share

Recommended Posts

Dear All Friends

How to set network setting from Image box to Printer software networking.?

I reload software in Dlab1 OS 1.06C and software 3.10G not change anything in Image box

now i go to setting and network setting and theare a File prints

Computer name 192.168.1.101

name of the Atitude directory IMAGE IN

D workflow

Address or name - IMAGE IN

so error network error dworkflow not reach the image on PC so what is the setting of

network Image box to Dlab1 machine ?

Please help me

Thanks

Link to comment
Share on other sites

  • 2 weeks later...

  • 2 weeks later...

what is the

Remote file prints

Machine name ...............?

directory name  .......................?

Remote Autosave

computer name...................?

directory name ...................?

D workflow

d-workflow Address or name .....................?

d-workflow Port.........................?

and Same as a Dlab MAchine Network option

Please help me Sir I Thankfull for your help

Link to comment
Share on other sites

All this is in the usual instructions to the machine. -

4.7  Network Orders, Settings

File print

Defines an external storage location within the network to which the d-lab copies and

saves the image files entered in the file print mode.

Autosave

Defines an external storage location within the network to which the d-lab copies and

saves the image files locally for Autosave configurations when the Autosave function is

activated.

–  Computer Name

Here the name or the IP address of the computer (Workstation) in the network is

indicated on which the data is to be saved.

–  Name of the enabled directory  

The release name is entered here; the actual directory name (released directory on the

specified Computer) is not used.  

Note:

The d-lab.1 logs into the Remote computer as User dlab (small letters) with the

password dlab (small letters). To allow the logging into the Remote computer, the

above User must have been created on it with the password. The password dlab of the

User dlab must never expire!

Release must be on the PC on which the directory was created. No password protection

must have been activated.

Network orders

This parameter can be used to limit the incoming order volume:

–  Maximum number of network orders:

This setting specifies the number of network orders that can be processed on the d-lab.

It covers the time span going from the entry up to the exit of the prints into the Sorter.

If the number of network orders rises above the preset value, the next network order is

fetched by the d-lab only when one of the network orders just being processed on the

d-lab is completely in the Sorter.

–  Maximum number of images in the network orders:

Orders with a higher number of prints are not fetched by the d-lab.

d-workflow

Information about the PC (Server) on which the d-workflow Software is installed (with

User interface) or about the image box workstation with the Software d-bridge (without

user interface, running at the background). This Software (see Ö PDM, further down) is

needed for network orders. It records incoming orders and connects them to the suitable

output device.

–  Standard IP address for image box workstation: 192.168.1.120.

–  Standard entry for Port-No. is 5001 or pfdfcom if the pertaining entry exists in the

file SERVICES.

Notes:

For information about the current version of d-workflow, please contact the service

engineer.

Address, Name and Port-No. must not contain line shifts, blanks or "\".

In network connections with several input devices, the d-workflow should be installed on

a PC that is only responsible for this task

Explanation:

–  PfDF (Photofinishing Data Format) is a standardized format for order data to be used in

networks.

–  The PDM (PFDF Data Manager) – for AgfaPhoto the software d-workflow and d-bridge

– manages the order files. It saves digital orders (images and PFDF information) until

they are called by a receiving station

  Call up in the Start screen:

Settings

Machine settings

Network orders

  File print

Computer name  

Enter the name or the IP address of a

workstation in the network

Name of the activated directory  

Enter the release name

  Autosave

Computer name  

Enter the name or the IP address of a

workstation in the network

Name of the activated directory  

Enter the release name

  Network orders

Maximum number of network orders

Enter the number

Maximum number of images for the

network preview  

Enter the number

  d-workflow

Address or Name

Enter the name or the IP address

Port-No.

Change the entry if you do not want to

accept the presetting.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
 Share

×
×
  • Create New...