slimakfoto Posted February 2, 2011 Report Share Posted February 2, 2011 hello all. I have a problem with the laser. It operates year and a half years since regeneration. friend recently picked up the laser gray filter. said the fiber is to be replaced. the machine could not be calibrated. too low density. last shows the message - drift of the laser power, blu. I checked today. gas laser 2340 mv 7 a. I know it too much. check fiber green 7%, blue 10% change. has to be 4% or less. how to reduce? You can use the script to reduce the laser power? ask you to do the trick. kamil Quote Link to comment Share on other sites More sharing options...
aksk Posted February 2, 2011 Report Share Posted February 2, 2011 how old the fiber optic and did you try to readjust the fiber on the gas laser. Quote Link to comment Share on other sites More sharing options...
slimakfoto Posted February 3, 2011 Author Report Share Posted February 3, 2011 hello. fiber have got i think 7 -8 years. readjust you mean turn screw?? and adjust fiber?? i tray buy after turn up the gray filter. laser have got 2800 hours and 900 burning. today have 6,8 a and 2200 mv Quote Link to comment Share on other sites More sharing options...
aksk Posted February 3, 2011 Report Share Posted February 3, 2011 the best way for you and you laser life time is replacing the fiber optic So,if you going to reduce the power monitor ,most likely it will effect badly on your prits quality. Quote Link to comment Share on other sites More sharing options...
slimakfoto Posted February 4, 2011 Author Report Share Posted February 4, 2011 thanks. i want to asc about cleaning this fiber. me serwisant told me he can clean this. what y think about this is that good for laser?? and do you know wher i can bay this fiber the best proce?? i know in england is this product but i cant find this firm. in german is for 2000 e/netto. Quote Link to comment Share on other sites More sharing options...
aksk Posted February 5, 2011 Report Share Posted February 5, 2011 you can try the cleaning first ,then see if the power value getting better. if not ,you should buy a brand new one. actually I know that this part is made by an english company ,but I don't know the name of it. and the 2000 euro is the right price for this part in germany. Quote Link to comment Share on other sites More sharing options...
majedyounso Posted February 5, 2011 Report Share Posted February 5, 2011 Dear if the light of your fiber is not good you need to change the fiber you can buy it from saal company and if you need to clean your fiber we can do it it cost 500 euro without fees of DHL best regards our company in syria if you like Quote Link to comment Share on other sites More sharing options...
slimakfoto Posted February 8, 2011 Author Report Share Posted February 8, 2011 thanks for answer. my serwisant try to clean fiber. thanks for all. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.