Jump to content

pp-densitomeater black field missing


mfvster
 Share

Recommended Posts

Sounds like slippage in the rollers on the large print exit. The hard the roller gets covered in stabiliser and gets too smooth. You'll see this because either the top belts are not turning all the time, or are juddery.

Use water and a light abrasive pad like Scotch Brite to clean this after removing top, sides, stainess steel piece and spacer bar that holds this in place.

It may be that the belts need replacing.

You can get through MBL's etc, by just assisting the rollers with your hand, to ensure they keep turning after the paper hits the densitometer.

We had the same issue very recently and fixed this way, but new belts will be needed soon. :)

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
 Share

×
×
  • Create New...