Jump to content

D-lab Error... HELP PLZ!!!


braga
 Share

Recommended Posts

Hi all, i have a huge problem in our Agfa D-lab 1

The machine is showing the following error

"PP: No Docking Since 2 Docking cycles 0> Repl. Stopped"

The machine technician is crazy and lost, he has desassembled the machine, re-installed the software and the error is always showing.

my best thanks, thank you very much.

Link to comment
Share on other sites

Try as aksk says, but it is not enough, reset manually PP maindboard and reload firmware, then go to service, do to commands, lookf for PP command and you will find an option to clear docking error. Finally go to service script and ensure to use reset emergency mode and other one like clear all error, ti will show you three level of reset, perfor them all. Turn off and on machine and Dlab will allow you to clera doking message from the regular operation enviroment.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
 Share

×
×
  • Create New...