Jump to content

Shimadzu lens, Dlab2


Julito
 Share

Recommended Posts

Hello guys,

I'm working with a Dlab2, SSL, the problem is that shimadzu power supply for the SSL does not receive blue signal, only green color is working and it is indicated in the shimadzu power supply and power monitor board. I replaced that shimadzu power supply, whole printer power supply, shimadzu controllers and cables with no succes. This morning I swapped the shimadzu laser len´s cables, the ones that goes to the pcb boards and blue color started to work but the green one just left, problem went to the other color. I wanna know if it is possible to swap or replace individually the shimatzu len modules, we have an other old SSL for taking the part. What you think?

Regards

Julio

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
 Share

×
×
  • Create New...